Product Characteristics:
1. Leveling: Use A4 paper to adjust to the platform and the nozzle until there is an obvious hindrance, but to be able to pull.
2.Oily Clean: Severe oil on the surface of the platform will affect adhesion; if this happens, please heat the bed to 90 or put the printer away for 8 hours, but the most direct way is to wipe a little with alcohol.
3. This product is acid- and alkali-resistant, with a high temperature resistance 400.
4. The first layer of the product has a hardness of 0.5H, which is easier to scratch, but the scratching does not affect the adhesion of the models.
5. This product will change color when rubbed repeatedly with alcohol, but will not affect normal use.
6. This product will enhance the viscosity and absorb oil ability of the platform after being slightly wiped with alcohol.
7. Try to avoid repeated touches on the platform by hand to prevent serious sweat from touching the platform.
8. This product is processed with a special process and will never appear in the glass, good solution to the problem of platform unevenness.
Temperature settings for different filaments:
PLA:50-70C
Flexible filament: 50-70C
ABS: 100-125C (110Cis recommended)
PC: 100–130 °C (120 °C is recommended)
Nelon: 90–120 °C (110 °C is recommended)
PP: 100–130 °C (120 °C is recommended)
PETG: 50-70C
Specification:
Material:Special Glass + microporous coatings
Item size:310*310*3mm
Box size: 360*350*40mm